Showing posts with label howe. Show all posts
Showing posts with label howe. Show all posts

Sunday, August 2, 2020

SOLD-GT-1/GTA/Vintage Tube Frame Race Car For Sale In Michigan



Howe Center Section/Port City Racing Chassis

Former ASA Pro Series Racing Car Driven By Joe Nott

SCCA Log Book Identity # 06-625

Midwest Council Of Sports Car Clubs Log Book

Most Recently Competed In SVRA Events At Indy, & Road America

Ford Thunderbird Five Star Fiberglass Body

Strut Front End Front Steer Set Up

Howe TA2 Three Piece Splined Front Sway Bar Set Up

New Schroder Sway Bar

New Kirkey (PN # 71700) Full Containment Road Race Seat & Cover

New Simpson Five Point Belts (Expire XX/XX) & Window Net

Safety Systems Five Pound On Board Fire Bottle With Remote Button

Sweet Rack And Pinion Steering

Peterson Dry Sump Tank With Steel Braided Lines

Ohlin Canister Coil Over Shocks With Proper Canister Mounts

Newer Fuel Safe 15 Gallon Fuel Cell

Autometer Gauges & Memory Tach

C&R Aluminum Radiator With Built In Oil Cooler

Allstar Performance Brake Bias Gauges

Front/Rear Brake Bias Adjuster

Road Racing Brake Lights

Dual MSD 6AN Ignition Boxes

New Allstar Performance Roll Bar Mounted Drink Bottle

Tilton Pedals & Remote Mount Master Cylinders

UB Machine Upper Control Arms

Winters Quick Change Rear Axle/Detroit Locker Assembly & New Gears

Three Link Rear Suspension & Watts Linkage Set Up

Two Into One /Exhaust/Muffer System

Steel Branded Fuel Line With Filter And Regulator

Four (4) Piston Wilwood Calipers At Each Corner

Allstar Performace Forced Air Brake Cooling Fans @ For All Four Wheels

Allstar Performance Helmet Cooling Fan

Longacre Racing Rear View Mirror

Remote Mount Wix Oil Filter

Wired In Permanent Mylaps Sports Timing Transponder # 08368

Drive Shaft And Yoke

This is a great starting package for someone wanting an inexpensive, tube frame race car, for SCCA, or vintage sanctioned events.  All parts are all oval track, stock car based, and very easy to come by, with reasonable prices for both new, or used.  Just add a motor and transmission of your choice, to be ready to go racing.

Complete Roller Pricing Options (no engine, transmission, or battery):

1.  With Ohlin Canister Coil Over Shocks:  $7,995.00

2.  Without Ohlin Coil Over Shocks:  $6,595.00

Includes Four (4) Extra (Used) Bassett Wheels

Located In The Grand Rapids, MI area

Phone/Text Gary:  616-366-3973

E Mail:  gearheadzmail@aol.com



Sunday, December 23, 2018

Installing A Howe TA2 Front Sway Bar Package

Our Ford Thunder Chicken GT1 cars arrived to it's new home, with a 1" Howe bolt on sway bar kit.  We decided to rework the front, with the the current kit that the professional teams are running, in the SCCA Trans Am TA2 class.  With some inside tips  from Dan over at Howe Racing, we were able to get all the right bits and pieces assembled, and put in to place.  Of course the big question of what size bar to run came  up front.  You would be very surprised to learn what  they are running in the pro series.  No bump stops, and bars that are in the 2 inch range.  THAT, is a whole lota front sway bar.   Springs need to go soft, but this is what is being made to work, so be aware of where set ups are at now days.  We will go with something less in overall bar diameter, probably 1 3/4" to start, with somewhat softer springs, than the 600 # units, that came installed on the front.  This is an ongoing work in progress.  Let us know if you have any questions, on your current cars set up.  We are always glad to help if we can.



Note:  The front shock is not yet attached to the lower control arm, in the photo above.




www.gearheadzproducts.com


Monday, November 19, 2018

Do You Want To Race In The Trans Am Series?



"Hey Mom Look, I Am Driving A Race Car"


Actually it is really easy to find a ride in some of the road race pro series, that you see on TV, or may have watched in person, at some of the big name race tracks.  The only thing you need is a bit of previous experience, and the money to put down up front, for one of the teams  "arrive and drive" spare cars.

SCCA TA-2 happens to be the hottest  race group right now, with the cars being fairly equal, and not too over the top expensive, compared to a Trans Am (GT-1) car.  Many of the race buggies come from Howe Racing, in Beaverton, MI, and are an extension of the many short track stock cars, that the company has  already build.  There are some other "approved" car suppliers as well.  When the series was first getting started, you could pretty much show up with an old ASA stock car, and get in the field, without any trouble.  But them of course, the big money came in and took over, and the rules changed, which is so often the case, in auto racing.

The series does draw some big names, including Adam Andretti (a regular).   Bill Elliott, and Paul Tracy, have made cameo appearances.  You will have to behave, or suffer the wrath of those with highly proven driving skills, for any first  laps bone head moves.

A new Howe car ready to dance will set you back something north of six figures, where as the old ASA stockers could be bought for less than $20K.  The gap between the two is fairly wide, in terms of performance.  You will still need a few spares, and a couple people to help out, who know what they are doing, and don't mind traveling, through out the summer.

This is a series for the wealthy sportsman racers, with the funding to buy 2 or 3 cars, and have at it.  There are some very professional, and established race teams (eg:  Mike Cope Racing) who bring cars in, as well.  Be ready to spend large, in order to play with the "family money" guys, and otheres, who are out there for the most part, without aspiring to move to higher forms of racing, such as NA$CAR, or Indy Car.

The other option is to rent your seat time, and there are many teams that will be glad to work out the details with you on doing so.  If the money comes from a sponsor, all the better, so check the TV schedule for next season, and drum up some viewership numbers, because that's what it's all about.  Keep in mind that many of the guy and gals in the lower NASCAR series (Xfinity, Camping World Truck), or ARCA, are there on a "pay to play" basis.  Plan on dropping somewhere in the neighborhood of $25K per race for a TA-2 ride, which does not include the extras, such as flights, hotels, dog sitter, etc.  If you want to go full tilt, in a top level Trans Am car, get ready to drop some money large.  It takes a lot, to keep one of those babies going.  The money has to come from some where.  See the sign below, which was on the windshield of a car, at the PRI Show in Indy, this year.



So now you know the rest of the story.   Don't give up, or get discouraged.  The best thing to do is get some seat time in something, and see if the whole thing is right for you anyway.  Karts are not a bad way to get in the game.  SCCA has many teams who rent cars, at the lower levels, for a lot less bucks.  Look at some of the approved driving schools, as a quick way to get the necessary license to compete.

Sooner or later it's important to show up with money, but money without experience is a very dangerous combination, in the game of auto racing.

www.gearheadzproducts.com





Sunday, September 30, 2018

Danger Signs We Found On Our Vintage Road Race Thunderbird




We brought this car into our shop, as kind of a side job, work on it when there is time, sort of project.  It is a former Howe/Port City ASA chassis, which like so many others, has been converted to road race configuration.  These cars are known for being well built, and safe, given the speeds and facilities that they ran on.  It had last been run at two of the very best know race tracks in the U.S.  The sanctioning body for the events is very well established, in vintage racing.  The car had also been raced with a well know national road race group, in non-vintage, "GT" type car configuration.  And that's where the story starts to get scary.  Real scary.

There were a few safety related concerns, which we are working to correct, as time allows.  For starters, the car is equipped with an electrical fuel pump, as are so many road race cars.  The master kill switch was located in the rearward, passenger side corner of the car.  It was no where within reach of the the previous driver, or any driver, unless he has five foot long arms.  If you have ever been in a real bad wreck, you know seconds can seem like minutes, while you try to figure out just what to do next.  Corner workers do not always arrive, in a hurry.

Think about what could happen, if there was a broken fuel line, sparks, and that electric fuel pump is continuing to do it's job.  As a driver, you might be disoriented, and not able to kill the power to the pump, in the few seconds necessary.  All the switches can look the same, and you could even hit the wrong one.  By placing the master switch in direct reach of the driver, there is only one movement necessary, with one arm, in the vital moments, after a big one.  Why not mount the master kill switch, in very close proximity, to the fire bottle switch?  We relocated the previously installed kill switch, which was actually a really easy job.

You can see the new switch location, in the photo below.  Note the LED "power on" indicator light. We included an easy to read, Allstar Performance, "On/Off" decal ( ALL99045).  Also added were some Allstar Performance red terminal covers (ALL76152).  The "shelf" was bent up from sheet steel, and welded in place.  The Sherwin Williams grey spray paint, matches perfect, and looks great.  Anyone can know at a glance, if the car is hot, or hot so not.  Notice those nice welds, from Howe Racing Enterprises.  These cars have good bones.  Maybe it will take a very bad vintage crash, for the vintage organizers to wake up, put down the tea, and  hot buttered croissants, and get serious about car inspections.  There are some pretty quick cars that run vintage, and not all the drivers have had a lot of experience racing.  With enough $$, you can buy yourself something that was a handful, for even Mark, or Parnelli, back in the day.  We are not sure what more to say about this, but of course, there is more.



The next subject is bolt on ballast, which in this case, gave us nightmares.  Same car, same tech inspection crews, same organization, big name tracks, and the potential for horrible results, in a roll over shunt.  Loose ballast flying through your windshield can be a very serious problem, trust on this.  Notice the size of the weight.  Over 100 lbs., for sure. The number "48" is from the cars ASA racing days, so it's hard to say when the install work was done.  Two half inch bolts, were all that was holding this massive chunk of weight, to the car.  The holes are easy to see, in the two photos.  The weight was actually bolted to an 1/8" strip of steel, that runs down the frame rail, put there to hold the fiberglass body door panel, in place.  You can literally lean on it with your big tow, and get it to flex.




We have had some surprising experiences, on the track, and off track, with race organizers, as well.  Once our cars clutch caught on fire, as we sat helpless, waving our arms, at the (regional race) corner workers.  Smoke was literally pouring out from under the front wheel wells, and no one even came over to check it out, despite frantic window waving.

Another time, we watched in amusement, as our car received it's annual tech inspection, very much outside, on a Friday night, and in the dark.  Flashlight, and all.  Seems crazy.  Safety starts with the driver, and car owner.  Don't count on others, even though you should be able to.  Bad things  can happen fast on a race track, don't make things worse.




Sunday, August 26, 2018

The Most Cost Effective Choice For Replacement LS-1 Ignition Coils


The choices for replacement ignition coils on the LS-1 motor get expensive real fast.  You have to wonder if the extra  money for the brand names are really worth it.  We did a fair amount of research, and settled on PerTronix, for the next set on our GT-2  race car.  We are very familiar with the brand, and the specs looked good.  This is pretty much a replacement for the GM truck coils, that went on the performance LS-1 motors, in the late 1990's.  The headers on our motor run up past the valve covers, and put a lot of heat out, right by the coils.  Plus they sit right on the valve covers anyway, which is a pretty hot area, as well.







http://www.gearheadzproducts.com


ARP Dampner Bolt For The LS-1 ASA Motor


This is the ARP harmonic balancer bolt to use, when replacing the one on your LS-1 ASA race motor.  

ARP Balancer Bolt Kits Feature Heavy duty balancer bolts that are rated to 200,000 PSI. Choose from bolts that accept a traditional 12-point socket or a 1/2" square drive, eliminating the need for a socket. Sold complete with large diameter, 1/4" thick washer.





Sunday, August 12, 2018

Gear Headz Products GT-2 Camaro House Car At Gingerman Raceway 5-19-18



Here is some in car Go Pro camera footage, from our Howe/Port City, GT-2 Camaro, at Gingerman Raceway, South Haven, MI.  This is a great track, for anyone just starting out in SCCA, or NASA competition.  The car's engine is an LS-1, as formerly used in the AC Delco ASA Stock Car Series.  Mike Cope out of Florida did much of the initial development work on the car, including the new Camaro body.  Transmission is a Jerico four speed, dog box, so no clutch is used for the up shifts and down shifts.  If you have any questions about getting started in racing, we will be glad to answer them.  Our experience includes:  stock cars, midgets, modifieds, F-2000, GT-2, on both the ovals, and road courses.  There is a class for everyone, so get off the couch, and get after it.  

We are on the web at:

http://www.gearheadzproducts.com







Sunday, August 7, 2016

ASA LS1 Race Car Won't Start Is Sometimes The ECU




When the gremlins come to call on race day, they love to find places to hide, in your LS1 electronics system.   The last two times out, we have been "pestered" by the little buggers, that move around like cock roaches, in the wiring system.  Six laps into the most recent SCCA Majors race, the car just decided to come to a dead stop, going around turn number  two, at Gingerman Raceway.  After considering everything, we plugged our code reader into the car, when back at the shop.  Our crew chief, son, and full-time bread slicer assembler, "GT" had a great idea.  The kid is sharp, and simply decided to erase all existing error codes, in the GM factory ECU unit.  The car that would not go anywhere, quickly fired riight back up again, after the weekend was done.
Since we had already seem some burned wiring, and also smoked a brand new "pay it off monthly" racing battery, it stared to seem that we had a problem coming from only one place.
The alternator was removed, and tested for output.  Our local electrical shop rebuilt it, and put in a new regulator, for a mere $85.00.  The unit is back in the car, and we are pretty sure, that this was the issue causing the (most recent) problems that we faced.  The moral of the story, always look for clues, that will lead you back to the root of the problem.  Stay "tuned", for futher developments.
Or stop by at the track if you are there.  You can also visit us at our web garage.  We can easily be found at:

http://gearheadzproducts.com/

Sunday, February 7, 2016

Some Basic Chassis Repair Work On Our Road Race Thunderbird

When the T Bird arrived in our shop, we knew she was in need of a little special attention.  The wounded chiicken was fresth from a "slide and bounce", off one of the Road America guard rails, which drove the right rear tire into the frame.  This former ASA race car is well built, but there was no choice except to replace the section of damaged frame that had been bent.  In the photo below, you can see where we took a Sazall, and a set of torches, to remove the bent  piece of 2" x 3" mild steel.  There are also a couple of welds that cracked in the crash, and we will deal with them at the tail end of the process.  Right now, our job is to set about fabricated a direct replacement frame unit, based on some simple measurements that were taken in the shop.  The right side mounted remote oil tank had to be removed, for the work to start, and is not present in the photos. 

 Old Frame Section Removed From The Right Hand Side
 
Old Frame Section On The Floor After Being Cut Out.
 
End View Of The New Frame Section Tack Welded Together
 
Side View Of The New Frame Section With Watts Linkage Mounting Holes
 

 http://www.gearheadzproducts.com

Sunday, December 6, 2015

A New V8 Road Racing Series For 2016

Below is an overview of a new series, for those who run classes such as GT1, GT2, GTA, etc.  Look it over, and check the schedule, to see if there is a race at a track near you.  Tube frames, and small block V8 engines, are a great way to go racing on a budget.







Announcing the V8 Road Racing Series!


Continuing in 2016 there’s a program for those that want to compete using big American V8’s in road racing events.  This program builds upon the very successful V8 Stock Car series that targeted specific events to provide enhanced competition in the Big Bore classes, but V8RRS expands the concept even further.

 

To encourage participation by a maximum number of drivers, series events will be held at major tracks covering the eastern half of the country and most participants are within an 8-hour drive of at least three locations.  While running as many weekends as possible certainly improves one’s chance of doing well, it is entirely possible to contend for a championship by racing three weekends plus the season-ending Championship Event held at a relatively central location. 

 

V8RRS – Where America’s V8 Road Racers Come to Play!

 

The program details:

  • Seven eligible classes – AS, GT1, GT2, GTA, GTSC, SPO, T1

    • GTSC is a series-defined class for high hp stock cars while all other classes are per SCCA’s current General Competition Rules (GCR).

  • Points will be awarded to series registrants in each class as follows:

1-25
2-21
3-18
4-17
5-16
6-15
7-14
8-13
9-12
10-11
11-10
12-9
13-8
14-7
15-6
16-5
17-4
18-3
19-2
20-1

  • In addition, each driver receives a bonus point for every competitor s/he finishes ahead of up to a maximum of ten (10) bonus points.

  • All weekends will be double race events.  The weekend format might vary but typically there will be a single qualifying session, a shorter “sprint” race of approximately 25 minutes, then a longer (50 miles) “feature” race to conclude our weekend.
  • Series members will count their best five (5) race points finishes during the 24-race season, then add the results from both races in the season-ending event at VIR.
  • Any ties will be broken by each driver’s finishing position in the last race of the year.
  • The series will collect a separate V8RRS event fee of $100 that’s in addition to the weekend entry fee collected by the host organization.
  • There is also the option of a season series registration fee of $150 that entitles each member to the following:

    • A $50 discount on each V8RRS event fee
    • Merchandise discounts from series sponsors

  • Each V8RRS event fee includes:

    • Identifying decals & patches
    • Eligibility for earning series points
    • Individual race awards
    • Season-ending class awards & prizes
    • As possible, at-track paddock coordination & socials
    • Eligibility for a chance in the $100 Early-Bird Entry drawing
    • Other benefits as the series grows

  • ALL monies collected in excess of series expenses will be returned to the racers via season-ending awards!

 

For additional information visit our website: http://www.v8roadracingseries.com/


Following is the 2016 V8RRS schedule:

 

No.
Date
Track
Location
In Conjunction With:
1
Jan 15-17
Sebring
Sebring FL
Central Florida Region SCCA Majors
2
Feb 27-28
NOLA
Avondale LA
SOWDiv SCCA Majors
3
Mar 18-20
Road Atlanta
Braselton GA
Atlanta Region SCCA Majors
4
Apr tbd
tbd
tbd
tbd
5
May 7-8
Daytona
Daytona Beach FL
Central Florida Region SCCA Regional
6
May 20-22
NJMP
Millville NJ
Champ Truck (Fri-Sat event)
7
Jun 3-5 (T)
Mid-Ohio
Lexington OH
Ohio Valley Region SCCA Majors
8
Jul 8-10
PittRace
Wampum PA
Pittsburgh Vintage Grand Prix
9
Jul 30-31
Road America
Elkhart Lake WI
Milwaukee Region SCCA
10
Aug 13-14
Charlotte
Concord NC
Central Carolinas Region SCCA Regional
11
Sep 17-18
Watkins Glen
Watkins Glen NY
Finger Lakes Region SCCA Regional
12
Oct 1-2
Summit Point
Summit Point WV
Washington DC Region SCCA Regional
*
Oct 15-16
VIR (Finale)
Alton VA
North Carolina Region SCCA Regional

 

 

(T) – indicates final dates still to be confirmed by track

 

Monday, May 25, 2015

Scaling The Camaro SCCA GT-2 Road Race Car

When scaling any race car, there are a few simple but important steps to follow.  We use Longacre electronic scales, with each load cell marked for the the corner of the car it goes to. 


The first step is to level the scales.  We purchased an extendable bubble level from Menards, that works great for the job.  Each scale should be leveled, and then the four load cells checked against each other.  Without doing this, you will never get an accurate reading of your cars corner weights.  We have seen guys scales cars in the dirt at the track, on race day.  The shop floor is the best place to do this, and most floors are not all that level either. 

   
The car should be placed in gear so it will not roll.  In addition, we put some pieces of steel against the tires, to keep the race car firmly in place.  Tire pressures should be set as they are for race day.  Hoosier recomends 23 to 26 lbs. cold for our compound, so we have been using 24 pounds as our starting point.  After that, we add bags of salt to the drivers seat.  The salt bags are each weighed, to insure that we get the same weight as the driver will bring to the seat.  This makes it easier for your "hot shoe" to participate in the scaling process as well.  Before adding the salt, we set the corner heights to the rules, to get close to our starting point, the work to be done.
 
 
Our experience from the circle track days has been that adding a driver to the vehicle takes wedge (LR/RF) percentages from the static settings.  With the road race car, we prefer to have the LF/RF weights a close to equal as we can get.  If you are scaling a roundy roundy racer, make sure the sway bar is not preloaded, which will throw off your readings.  The bar should be fully backed off for scaling.  Due to our heavy driver, all the balast has been removed from our Howe Port City vehicle (former ASA racer).  You may need to add some, to bring the car up to minimum which in our case is 2830 lbs, for GT-2.
You will need to make corner corrections, to get the car where you want it.  With coil over shocks, this is really easy.  Make adjustments at all four corners.  For example if you need a little more LR/RF, then put a turn in the LR/RF, and take a turn out of the RR/LF.  We run Pro Shocks, with double adjustables on the front, and rebound adjustables on the rear.  Find someone to dyno your shocks, and make sure that there is no abnormalities in the curve, which can be seen in a computer print out from the dyno run.
Our car has gotten a little loose a couple time, in tight right hand turn situtations.  We went a little softer on the front springs, that what was in the car when we received it.  This is really the fun part of the whole thing, making small adjustments, and seeing how they affect the feel of the vehicle.
 
 

http://www.gearheadzproducts.com




 

Sunday, September 14, 2014

Easy To Install Race Car Switch Panel

This is a good time of year to review everything in the cockpit,  add some upgrades such as an LED oil pressure light, radios, dash labels, etc.  A clean toggle switch arrangement is very important for the driver to have easy access to.  The photos below show our GT-2 house car dash board, as orginally supplied by the fabricators at Port City Racing, in Muskegon, MI.  All the operating switches are to the drivers left, easy to reach, and read as well.  You can purchase toggle switch extensions, which make it much easier  to access the switches, when buckeled snugly into the car.  The panel shown in the second photo is an easy to wire up and install unit, with most  of the hook  ups already made for you.  We had to relocate the fire bottle in the car when we brought it home, so it was in easy reach of the drivers left hand.  A very important detail, the last owner overlooked.  Don't forget to add high density padding, to all areas around the driver, and anywhere near by. 


Thursday, August 7, 2014

GT-2 Howe Port City Road Race Camaro


This blog is all about the work and set up involved with running a Howe type chassis, in road race compeition.  Our base car for discussion purposes can run in the GTA, and GT-2 classes of SCCA.  It would most likely make the grade for TA-2, in the Trans Am series as well.  It is a former ASA race car, with the LS-1 motor which came from Lingenfeher, down in Indiana.  The car was built at Port City Racing, using the Howe ASA spec center section.  It has a Jerrico four speed transmission, Winters quick change reat end, Wilwood brakes, Sweet power steering, Cool Shirt system, and Pro Shocks.  We worked with Schwanke up in Minnesota to get the ECU reflased.  Mike Cope down in Florida did the AR Camaro body conversion, which involved lowering the roll cage to get it to fit.  Mike has also helped us with the basic set up on the car, since this is our first tube frame road racer.  We will make reference to some of the products used on the car, that come from our own business, Gear Headz Products  

http://gearheadzproducts.com/