Hewland GT-1 Or Trans Am ST Dog Box Transmission For Sale

 We have a used Hewland ST dog ring gear box for sale.  See all the details, below.  Great for GT-1, or vintage racers.  Always good, to have a spare on hand.  Includes extra gear sets, and misc. parts.  Located in the Grand Rapids, MI area.

https://www.gearheadzproducts.com/hewlandst-030sccatransamgt-1fivespeedgearboxused.aspx

A New Corvette GT-1 Car In Our Shop

 A New Corvette GT-1 Car In Our Shop

We will start to try and post some info on this newest car in our shop.  It has some interesting race history, and has been in need of a lot of cosmetic work, wiring improvements, and various upgrades.  

SOLD-GT-1/GTA/Vintage Tube Frame Race Car For Sale In Michigan

Howe Center Section/Port City Racing Chassis

Former ASA Pro Series Racing Car Driven By Joe Nott

SCCA Log Book Identity # 06-625

Midwest Council Of Sports Car Clubs Log Book

Most Recently Competed In SVRA Events At Indy, & Road America

Ford Thunderbird Five Star Fiberglass Body

Strut Front End Front Steer Set Up

Howe TA2 Three Piece Splined Front Sway Bar Set Up

New Schroder Sway Bar

New Kirkey (PN # 71700) Full Containment Road Race Seat & Cover

New Simpson Five Point Belts (Expire XX/XX) & Window Net

Safety Systems Five Pound On Board Fire Bottle With Remote Button

Sweet Rack And Pinion Steering

Peterson Dry Sump Tank With Steel Braided Lines

Ohlin Canister Coil Over Shocks With Proper Canister Mounts

Newer Fuel Safe 15 Gallon Fuel Cell

Autometer Gauges & Memory Tach

C&R Aluminum Radiator With Built In Oil Cooler

Allstar Performance Brake Bias Gauges

Front/Rear Brake Bias Adjuster

Road Racing Brake Lights

Dual MSD 6AN Ignition Boxes

New Allstar Performance Roll Bar Mounted Drink Bottle

Tilton Pedals & Remote Mount Master Cylinders

UB Machine Upper Control Arms

Winters Quick Change Rear Axle/Detroit Locker Assembly & New Gears

Three Link Rear Suspension & Watts Linkage Set Up

Two Into One /Exhaust/Muffer System

Steel Branded Fuel Line With Filter And Regulator

Four (4) Piston Wilwood Calipers At Each Corner

Allstar Performace Forced Air Brake Cooling Fans @ For All Four Wheels

Allstar Performance Helmet Cooling Fan

Longacre Racing Rear View Mirror

Remote Mount Wix Oil Filter

Wired In Permanent Mylaps Sports Timing Transponder # 08368

Drive Shaft And Yoke

This is a great starting package for someone wanting an inexpensive, tube frame race car, for SCCA, or vintage sanctioned events.  All parts are all oval track, stock car based, and very easy to come by, with reasonable prices for both new, or used.  Just add a motor and transmission of your choice, to be ready to go racing.

Complete Roller Pricing Options (no engine, transmission, or battery):

1.  With Ohlin Canister Coil Over Shocks:  $7,995.00

2.  Without Ohlin Coil Over Shocks:  $6,595.00

Includes Four (4) Extra (Used) Bassett Wheels

Located In The Grand Rapids, MI area

Phone/Text Gary:  616-366-3973

E Mail:  gearheadzmail@aol.com

We Are Proud To Announce Our New Association With Win Smith Racing

Gear Headz Products will be on board with this Stanford, Kentucky based racing team, in the upcoming 2019 racing season. With multiple SCCA GTA/GT2 Howe road race cars, and a few additional short track stock cars in the shop as well, the Win Smith organization is serous about running hard.

In the past, they have given new opportunities to up and coming young funded drivers, and are always on the look out, for fresh new talent.

Win Smith Racing has a very speedy background, that includes high speed GT road racing, stock cars, and additional oval experience, with the very fast USAC midgets, and Silver Crown cars, as well.

Watch for them, at the better known race tracks, across the midwest, during the new racing season. With components from you know who.

Visit Gear Headz Products On The Web Today:

www.gearheadzproducts.com

DEI Reflect-A-GOLD Keeps Heat Away From Vital Components

DEI Reflect-A-GOLD is engineered  to keep the heat  going the other direction, in your engine compartment.  We have used this product for years on our own GT-2 racer, after seeing it under the hood of an Indy car, down at the speedway.  Available in a variety of sizes,  you will find lots of uses for it.  Looks great, under any hood.

See all our race related products today at:

www.gearheadzproducts.com

OMP Took Hook Is The Best Bang For The Buck

There is nobody, and we mean NOBODY, who has been yanked back to the pits more times than us.  Nobody.  (Except Danica).  We have found that the OMP tow hook out performs them all.  Simply, bright color, low profile, cost effective.  Required by SCCA, NASA, IMSA, and all the rest.  The choice of European professionals.  Great for track day cars, as well.  Test one for your self, and see the difference a quality tow hook can make.

Visit our race shop, on the web, at:

http://www.gearheadzproducts.com

The Most Cost Effective Choice For Replacement LS-1 Ignition Coils

The choices for replacement ignition coils on the LS-1 motor get expensive real fast.  You have to wonder if the extra  money for the brand names are really worth it.  We did a fair amount of research, and settled on PerTronix, for the next set on our GT-2  race car.  We are very familiar with the brand, and the specs looked good.  This is pretty much a replacement for the GM truck coils, that went on the performance LS-1 motors, in the late 1990's.  The headers on our motor run up past the valve covers, and put a lot of heat out, right by the coils.  Plus they sit right on the valve covers anyway, which is a pretty hot area, as well.

http://www.gearheadzproducts.com

Quatermaster Clutch Kit For ASA LS-1 Motor

If you are looking to replace the clutch assembly on your LS-1 ASA motor, it can get a little confusing as to which kit to order. You will find this is typically a non-stock, special order item, which cannot be returned. The Quartermaster part number you need to know is:  QTR39817790.  This is the assembly which will bolt up directly to the LS-1 Crankshaft.  These motors were originally shipped by Chevrolet, down to Lingenfelter, in IN, for final prep, work, before installation in AC Delco ASA Race Series cars.

http://www.gearheadzproducts.com

Gear Headz Products GT-2 Camaro House Car At Gingerman Raceway 5-19-18

Here is some in car Go Pro camera footage, from our Howe/Port City, GT-2 Camaro, at Gingerman Raceway, South Haven, MI.  This is a great track, for anyone just starting out in SCCA, or NASA competition.  The car's engine is an LS-1, as formerly used in the AC Delco ASA Stock Car Series.  Mike Cope out of Florida did much of the initial development work on the car, including the new Camaro body.  Transmission is a Jerico four speed, dog box, so no clutch is used for the up shifts and down shifts.  If you have any questions about getting started in racing, we will be glad to answer them.  Our experience includes:  stock cars, midgets, modifieds, F-2000, GT-2, on both the ovals, and road courses.  There is a class for everyone, so get off the couch, and get after it.  

We are on the web at:

http://www.gearheadzproducts.com

Your Dealer For Allstar Performance

We have used this companies products on our race cars for many years, and are now an authorized dealer, for their high quality, performance proven parts.  If you race ARCA, K&N, CRA, SCCA, NASA, IMCA, IMSA, or any other racing series, visit our store on the web.  Lots of great stuff for serious street machines, as well.  New products are being added, every week.  Need a catalog, just let us know, and we will get one headed your way.  Our retail store will be opening in the near future, located in Grandville, MI.  Something for everyone who runs fast and hard.

http://gearheadzproducts.com/

Event Dashboard | MotorsportReg.com

Event Dashboard | MotorsportReg.com

http://gearheadzproducts.com/

Ultrasonic Cleaning Of Your High Performance Parts

The Very Best Way To Clean Your Small Parts

Ultrasonic cleaning systems send high frequency sound waves riping through an ultrasonic cleaning/degreasing solution, leaving superheated  bubbles in the waves wake.  When these bubbles (cavatations) colapse (decavitation), the heat and energy of the their implosions work  with the cleaning solution to remove dirt, oils, resude, and oxidation from the the contaminated item.  This type of cleaning is ideal for carburetor components, non-electrica ignition parts, and a variety of other automotive items, as well.
We are now offering the best, and least abrasive way to clean small automotive parts, as a mail order service. You can send us up to 12 small items, which we will clean and return to you, within 3 to 5 working days. This is the same way jewelery stores, opticians, clean what they repair,  but we use a degreasing cleanser, to remove any and all grime, from your parts. The cost for the service is $39.95, which includes return shipping, within the 48 states. We accept Visa, Mastercard, Discover, and Paypal.

http://www.gearheadzproducts.com

 

 

 

 

 

ASA LS1 Race Car Won't Start Is Sometimes The ECU

When the gremlins come to call on race day, they love to find places to hide, in your LS1 electronics system.   The last two times out, we have been "pestered" by the little buggers, that move around like cock roaches, in the wiring system.  Six laps into the most recent SCCA Majors race, the car just decided to come to a dead stop, going around turn number  two, at Gingerman Raceway.  After considering everything, we plugged our code reader into the car, when back at the shop.  Our crew chief, son, and full-time bread slicer assembler, "GT" had a great idea.  The kid is sharp, and simply decided to erase all existing error codes, in the GM factory ECU unit.  The car that would not go anywhere, quickly fired riight back up again, after the weekend was done.
Since we had already seem some burned wiring, and also smoked a brand new "pay it off monthly" racing battery, it stared to seem that we had a problem coming from only one place.
The alternator was removed, and tested for output.  Our local electrical shop rebuilt it, and put in a new regulator, for a mere $85.00.  The unit is back in the car, and we are pretty sure, that this was the issue causing the (most recent) problems that we faced.  The moral of the story, always look for clues, that will lead you back to the root of the problem.  Stay "tuned", for futher developments.
Or stop by at the track if you are there.  You can also visit us at our web garage.  We can easily be found at:

http://gearheadzproducts.com/

ASA LS1 Race Car Won't Start Is Not Always The ECU

We recently drove up to the grid and parked, to go out for the first race of the new SCCA year.  At two minutes, they blew the whistle, and the same car that we just drove up to our spot, would not start.  No way, no how.  The tendency is to blame the ECU right away, especially with these cars.  But the folks up a Schwanke say they rarely if ever see one go bad.  At lease not with out a good reason (attaching a welder ground for instance)  It's real simple, you have to have spark, compression, and gas.  In our case, the fuel pump was not priming the system, and there was no go juice, up at the inspection port we installed, on the engine fuel rail.  After tracing the  dual fuel pump circuit back, we found a slightly unexpected burnt (to a chrisp) four prong wire connector, which kind of ruined the day, and the weekend.  Allstar makes a replacement OEM style four prong unit, PN # ALL76269, rated at 20 amps.  Our very small packet arrived in a very large box, with a couple of air bags, to reduce the chance of damage (?). 

At any rate, we were glad to pay the $13.50 in shipping for this $3.75 shipment, to get after fixing the problem.  Make sure you order extra individual male and female connectors, because there is a reason they sell them seperately.  We ended up building a whole new harness, on the switch side of the system.  There was very little extra wire to work with anyway, so we made sure it will be easier to deal with, in the future.  The LS-1 burped to life at the frst spin of the Tilton, and we are back in business.  See the seperate blog, about the time the pump connection vibrated loose.  These cars are fun, cheap, but somedays, an electrical challenge.

http://www.gearheadzproducts.com

Taylor Switches Have A Great Reputation Because They Work

We have a cool suit panel in our race car, that has switches that look like tooth picks.  Obviously they break, and usually at the worst time ever, on race day.  They are part of an expensive cooling system for the driver, and they might be good for use by a doctor doing heart surgery, but they have no business, anywhere beyond the people who make you sign the race track waivers.

We like Taylor all the way, for serious electrical work.  They are big, well built, and made for racing.
With all the things coming out of China now days, it's great to have a key component that you can rely on, to keep your speed buggy going.
We stock what we use, and use what we sell.  Take a look, you will be glad you did.

 

 

 

Taylor Switches Are  The Only Way To Go On Race Day 

 

 

 

http://www.gearheadzproducts.com

Dude Is That Your Jerico Transmission Over There In The Weeds???

Our team purchased one of the many used Howe ASA cars that had been raced down in Florida a few years ago.  It had already been converted from roundy round to both way action.  Overall, the car was in good shape, had a few leaks, but could be made race ready for much less money than a new one.  During the intial inspection of the underside, we noticed a loose 3/4"  bolt, where transmission bolted up to the aluminum (standard issue) Quartermaster clutch housing.  As it turned out, three of the bolts were stripped out.   It would take a lot more that a strong arm to destroy the threads on one of these bolts, so we suspected that there were other issues at play here.  A plan was implemented to develop a "root cause analysis" investgation.  In words, we decided to try and figure out what was really going on.  There is a lot of vibration going on at full speed with one of these cars, so we fabbed up a simple support bracket, for the back part of the transmission.  A "used" transmission bracket from a NASCAR team was found for sale on the internet, and we tacked together the rest with our wender, laying underneath the car.  Simple, effective, cheap, and we still have our transmission, in the vehicle, and not somewhere else.  The bolt on brackets that attached to the car frame are Allstar units, and come "ready made" with mounting holes drilled and tapped in them, from the good folks over in Coloma.  From there, it was just a matter of stitching everything together.  Helicoils were sunk in at all four corners of the clutch housing, and the box of gears was once again ready fer beating.

 

 

We talk cars, especially GT-2, GTA, TA-2.  If you have a question, feel free to give us a call.  Our garage is always open, even if we can't get to the phone.  Stop by over on the new cyber highway at:

http://www.gearheadzproducts.com

Some Basic Chassis Repair Work On Our Road Race Thunderbird

When the T Bird arrived in our shop, we knew she was in need of a little special attention.  The wounded chiicken was fresth from a "slide and bounce", off one of the Road America guard rails, which drove the right rear tire into the frame.  This former ASA race car is well built, but there was no choice except to replace the section of damaged frame that had been bent.  In the photo below, you can see where we took a Sazall, and a set of torches, to remove the bent  piece of 2" x 3" mild steel.  There are also a couple of welds that cracked in the crash, and we will deal with them at the tail end of the process.  Right now, our job is to set about fabricated a direct replacement frame unit, based on some simple measurements that were taken in the shop.  The right side mounted remote oil tank had to be removed, for the work to start, and is not present in the photos. 

 Old Frame Section Removed From The Right Hand Side

 

Old Frame Section On The Floor After Being Cut Out.

 

End View Of The New Frame Section Tack Welded Together

 

Side View Of The New Frame Section With Watts Linkage Mounting Holes

 

 http://www.gearheadzproducts.com

A Thunderbird Road Race GTA Car Joins Our Blog

Like many of you, we are always scouting E Bay, and Racing Junk, looking for that next exciting project.  Our gang has become big fans of former ASA cars, because there are a number of them floating around, they sure don't cost much, and make great road racers.   We have had a Baker Motor setting in our shop for a while, from the days of sportsman short track fender banging, and looking for a chassis to drop it into.  A couple months ago, a Johnny Benson car came up locally, for $4,000, but it had been sitting in "as raced" condition for many years.  Overall in good condition, but not yet converted over to left hand/right hand operation.  Then we discovered this Former Joe Nott V6 ASA race car, just a little bit further from home.  It had the switch done by Howe, but was in need of some work, due to a "smack job" with one of the guard rails, over at Road America.  Besides our Camaro  GT-2 car, we will start documenting the modifications, and upgrades, to this race machine.  Stay "tuned", for further developments.

http://www.gearheadzproducts.com



A New V8 Road Racing Series For 2016

Below is an overview of a new series, for those who run classes such as GT1, GT2, GTA, etc.  Look it over, and check the schedule, to see if there is a race at a track near you.  Tube frames, and small block V8 engines, are a great way to go racing on a budget.

Announcing the V8 Road Racing Series!

Continuing in 2016 there’s a program for those that want to compete using big American V8’s in road racing events.  This program builds upon the very successful V8 Stock Car series that targeted specific events to provide enhanced competition in the Big Bore classes, but V8RRS expands the concept even further.

 

To encourage participation by a maximum number of drivers, series events will be held at major tracks covering the eastern half of the country and most participants are within an 8-hour drive of at least three locations.  While running as many weekends as possible certainly improves one’s chance of doing well, it is entirely possible to contend for a championship by racing three weekends plus the season-ending Championship Event held at a relatively central location. 

 

V8RRS – Where America’s V8 Road Racers Come to Play!

 

The program details:

• Seven eligible classes – AS, GT1, GT2, GTA, GTSC, SPO, T1

• GTSC is a series-defined class for high hp stock cars while all other classes are per SCCA’s current General Competition Rules (GCR).

• Points will be awarded to series registrants in each class as follows:

1-25	2-21	3-18	4-17	5-16	6-15	7-14	8-13	9-12	10-11
11-10	12-9	13-8	14-7	15-6	16-5	17-4	18-3	19-2	20-1

• In addition, each driver receives a bonus point for every competitor s/he finishes ahead of up to a maximum of ten (10) bonus points.

• All weekends will be double race events.  The weekend format might vary but typically there will be a single qualifying session, a shorter “sprint” race of approximately 25 minutes, then a longer (50 miles) “feature” race to conclude our weekend.
• Series members will count their best five (5) race points finishes during the 24-race season, then add the results from both races in the season-ending event at VIR.
• Any ties will be broken by each driver’s finishing position in the last race of the year.
• The series will collect a separate V8RRS event fee of $100 that’s in addition to the weekend entry fee collected by the host organization.
• There is also the option of a season series registration fee of $150 that entitles each member to the following:

• A $50 discount on each V8RRS event fee
• Merchandise discounts from series sponsors

• Each V8RRS event fee includes:

• Identifying decals & patches
• Eligibility for earning series points
• Individual race awards
• Season-ending class awards & prizes
• As possible, at-track paddock coordination & socials
• Eligibility for a chance in the $100 Early-Bird Entry drawing
• Other benefits as the series grows

• ALL monies collected in excess of series expenses will be returned to the racers via season-ending awards!

 

For additional information visit our website: http://www.v8roadracingseries.com/

Following is the 2016 V8RRS schedule:

 

No.	Date	Track	Location	In Conjunction With:
1	Jan 15-17	Sebring	Sebring FL	Central Florida Region SCCA Majors
2	Feb 27-28	NOLA	Avondale LA	SOWDiv SCCA Majors
3	Mar 18-20	Road Atlanta	Braselton GA	Atlanta Region SCCA Majors
4	Apr tbd	tbd	tbd	tbd
5	May 7-8	Daytona	Daytona Beach FL	Central Florida Region SCCA Regional
6	May 20-22	NJMP	Millville NJ	Champ Truck (Fri-Sat event)
7	Jun 3-5 (T)	Mid-Ohio	Lexington OH	Ohio Valley Region SCCA Majors
8	Jul 8-10	PittRace	Wampum PA	Pittsburgh Vintage Grand Prix
9	Jul 30-31	Road America	Elkhart Lake WI	Milwaukee Region SCCA
10	Aug 13-14	Charlotte	Concord NC	Central Carolinas Region SCCA Regional
11	Sep 17-18	Watkins Glen	Watkins Glen NY	Finger Lakes Region SCCA Regional
12	Oct 1-2	Summit Point	Summit Point WV	Washington DC Region SCCA Regional
*	Oct 15-16	VIR (Finale)	Alton VA	North Carolina Region SCCA Regional

 

 

(T) – indicates final dates still to be confirmed by track