Showing posts with label NASA. Show all posts
Showing posts with label NASA. Show all posts

Sunday, August 2, 2020

SOLD-GT-1/GTA/Vintage Tube Frame Race Car For Sale In Michigan



Howe Center Section/Port City Racing Chassis

Former ASA Pro Series Racing Car Driven By Joe Nott

SCCA Log Book Identity # 06-625

Midwest Council Of Sports Car Clubs Log Book

Most Recently Competed In SVRA Events At Indy, & Road America

Ford Thunderbird Five Star Fiberglass Body

Strut Front End Front Steer Set Up

Howe TA2 Three Piece Splined Front Sway Bar Set Up

New Schroder Sway Bar

New Kirkey (PN # 71700) Full Containment Road Race Seat & Cover

New Simpson Five Point Belts (Expire XX/XX) & Window Net

Safety Systems Five Pound On Board Fire Bottle With Remote Button

Sweet Rack And Pinion Steering

Peterson Dry Sump Tank With Steel Braided Lines

Ohlin Canister Coil Over Shocks With Proper Canister Mounts

Newer Fuel Safe 15 Gallon Fuel Cell

Autometer Gauges & Memory Tach

C&R Aluminum Radiator With Built In Oil Cooler

Allstar Performance Brake Bias Gauges

Front/Rear Brake Bias Adjuster

Road Racing Brake Lights

Dual MSD 6AN Ignition Boxes

New Allstar Performance Roll Bar Mounted Drink Bottle

Tilton Pedals & Remote Mount Master Cylinders

UB Machine Upper Control Arms

Winters Quick Change Rear Axle/Detroit Locker Assembly & New Gears

Three Link Rear Suspension & Watts Linkage Set Up

Two Into One /Exhaust/Muffer System

Steel Branded Fuel Line With Filter And Regulator

Four (4) Piston Wilwood Calipers At Each Corner

Allstar Performace Forced Air Brake Cooling Fans @ For All Four Wheels

Allstar Performance Helmet Cooling Fan

Longacre Racing Rear View Mirror

Remote Mount Wix Oil Filter

Wired In Permanent Mylaps Sports Timing Transponder # 08368

Drive Shaft And Yoke

This is a great starting package for someone wanting an inexpensive, tube frame race car, for SCCA, or vintage sanctioned events.  All parts are all oval track, stock car based, and very easy to come by, with reasonable prices for both new, or used.  Just add a motor and transmission of your choice, to be ready to go racing.

Complete Roller Pricing Options (no engine, transmission, or battery):

1.  With Ohlin Canister Coil Over Shocks:  $7,995.00

2.  Without Ohlin Coil Over Shocks:  $6,595.00

Includes Four (4) Extra (Used) Bassett Wheels

Located In The Grand Rapids, MI area

Phone/Text Gary:  616-366-3973

E Mail:  gearheadzmail@aol.com



Sunday, December 23, 2018

Installing A Howe TA2 Front Sway Bar Package

Our Ford Thunder Chicken GT1 cars arrived to it's new home, with a 1" Howe bolt on sway bar kit.  We decided to rework the front, with the the current kit that the professional teams are running, in the SCCA Trans Am TA2 class.  With some inside tips  from Dan over at Howe Racing, we were able to get all the right bits and pieces assembled, and put in to place.  Of course the big question of what size bar to run came  up front.  You would be very surprised to learn what  they are running in the pro series.  No bump stops, and bars that are in the 2 inch range.  THAT, is a whole lota front sway bar.   Springs need to go soft, but this is what is being made to work, so be aware of where set ups are at now days.  We will go with something less in overall bar diameter, probably 1 3/4" to start, with somewhat softer springs, than the 600 # units, that came installed on the front.  This is an ongoing work in progress.  Let us know if you have any questions, on your current cars set up.  We are always glad to help if we can.



Note:  The front shock is not yet attached to the lower control arm, in the photo above.




www.gearheadzproducts.com


Thursday, September 20, 2018

OMP Took Hook Is The Best Bang For The Buck

There is nobody, and we mean NOBODY, who has been yanked back to the pits more times than us.  Nobody.  (Except Danica).  We have found that the OMP tow hook out performs them all.  Simply, bright color, low profile, cost effective.  Required by SCCA, NASA, IMSA, and all the rest.  The choice of European professionals.  Great for track day cars, as well.  Test one for your self, and see the difference a quality tow hook can make.



Visit our race shop, on the web, at:

Sunday, August 26, 2018

The Most Cost Effective Choice For Replacement LS-1 Ignition Coils


The choices for replacement ignition coils on the LS-1 motor get expensive real fast.  You have to wonder if the extra  money for the brand names are really worth it.  We did a fair amount of research, and settled on PerTronix, for the next set on our GT-2  race car.  We are very familiar with the brand, and the specs looked good.  This is pretty much a replacement for the GM truck coils, that went on the performance LS-1 motors, in the late 1990's.  The headers on our motor run up past the valve covers, and put a lot of heat out, right by the coils.  Plus they sit right on the valve covers anyway, which is a pretty hot area, as well.







http://www.gearheadzproducts.com


Sunday, August 12, 2018

Gear Headz Products GT-2 Camaro House Car At Gingerman Raceway 5-19-18



Here is some in car Go Pro camera footage, from our Howe/Port City, GT-2 Camaro, at Gingerman Raceway, South Haven, MI.  This is a great track, for anyone just starting out in SCCA, or NASA competition.  The car's engine is an LS-1, as formerly used in the AC Delco ASA Stock Car Series.  Mike Cope out of Florida did much of the initial development work on the car, including the new Camaro body.  Transmission is a Jerico four speed, dog box, so no clutch is used for the up shifts and down shifts.  If you have any questions about getting started in racing, we will be glad to answer them.  Our experience includes:  stock cars, midgets, modifieds, F-2000, GT-2, on both the ovals, and road courses.  There is a class for everyone, so get off the couch, and get after it.  

We are on the web at:

http://www.gearheadzproducts.com







Your Dealer For Allstar Performance




We have used this companies products on our race cars for many years, and are now an authorized dealer, for their high quality, performance proven parts.  If you race ARCA, K&N, CRA, SCCA, NASA, IMCA, IMSA, or any other racing series, visit our store on the web.  Lots of great stuff for serious street machines, as well.  New products are being added, every week.  Need a catalog, just let us know, and we will get one headed your way.  Our retail store will be opening in the near future, located in Grandville, MI.  Something for everyone who runs fast and hard.

http://gearheadzproducts.com/


Thursday, June 30, 2016

ASA LS1 Race Car Won't Start Is Not Always The ECU


We recently drove up to the grid and parked, to go out for the first race of the new SCCA year.  At two minutes, they blew the whistle, and the same car that we just drove up to our spot, would not start.  No way, no how.  The tendency is to blame the ECU right away, especially with these cars.  But the folks up a Schwanke say they rarely if ever see one go bad.  At lease not with out a good reason (attaching a welder ground for instance)  It's real simple, you have to have spark, compression, and gas.  In our case, the fuel pump was not priming the system, and there was no go juice, up at the inspection port we installed, on the engine fuel rail.  After tracing the  dual fuel pump circuit back, we found a slightly unexpected burnt (to a chrisp) four prong wire connector, which kind of ruined the day, and the weekend.  Allstar makes a replacement OEM style four prong unit, PN # ALL76269, rated at 20 amps.  Our very small packet arrived in a very large box, with a couple of air bags, to reduce the chance of damage (?). 






At any rate, we were glad to pay the $13.50 in shipping for this $3.75 shipment, to get after fixing the problem.  Make sure you order extra individual male and female connectors, because there is a reason they sell them seperately.  We ended up building a whole new harness, on the switch side of the system.  There was very little extra wire to work with anyway, so we made sure it will be easier to deal with, in the future.  The LS-1 burped to life at the frst spin of the Tilton, and we are back in business.  See the seperate blog, about the time the pump connection vibrated loose.  These cars are fun, cheap, but somedays, an electrical challenge.




http://www.gearheadzproducts.com

Sunday, February 7, 2016

Some Basic Chassis Repair Work On Our Road Race Thunderbird

When the T Bird arrived in our shop, we knew she was in need of a little special attention.  The wounded chiicken was fresth from a "slide and bounce", off one of the Road America guard rails, which drove the right rear tire into the frame.  This former ASA race car is well built, but there was no choice except to replace the section of damaged frame that had been bent.  In the photo below, you can see where we took a Sazall, and a set of torches, to remove the bent  piece of 2" x 3" mild steel.  There are also a couple of welds that cracked in the crash, and we will deal with them at the tail end of the process.  Right now, our job is to set about fabricated a direct replacement frame unit, based on some simple measurements that were taken in the shop.  The right side mounted remote oil tank had to be removed, for the work to start, and is not present in the photos. 

 Old Frame Section Removed From The Right Hand Side
 
Old Frame Section On The Floor After Being Cut Out.
 
End View Of The New Frame Section Tack Welded Together
 
Side View Of The New Frame Section With Watts Linkage Mounting Holes
 

 http://www.gearheadzproducts.com

Sunday, December 20, 2015

A Thunderbird Road Race GTA Car Joins Our Blog

Like many of you, we are always scouting E Bay, and Racing Junk, looking for that next exciting project.  Our gang has become big fans of former ASA cars, because there are a number of them floating around, they sure don't cost much, and make great road racers.   We have had a Baker Motor setting in our shop for a while, from the days of sportsman short track fender banging, and looking for a chassis to drop it into.  A couple months ago, a Johnny Benson car came up locally, for $4,000, but it had been sitting in "as raced" condition for many years.  Overall in good condition, but not yet converted over to left hand/right hand operation.  Then we discovered this Former Joe Nott V6 ASA race car, just a little bit further from home.  It had the switch done by Howe, but was in need of some work, due to a "smack job" with one of the guard rails, over at Road America.  Besides our Camaro  GT-2 car, we will start documenting the modifications, and upgrades, to this race machine.  Stay "tuned", for further developments.




Monday, May 25, 2015

Scaling The Camaro SCCA GT-2 Road Race Car

When scaling any race car, there are a few simple but important steps to follow.  We use Longacre electronic scales, with each load cell marked for the the corner of the car it goes to. 


The first step is to level the scales.  We purchased an extendable bubble level from Menards, that works great for the job.  Each scale should be leveled, and then the four load cells checked against each other.  Without doing this, you will never get an accurate reading of your cars corner weights.  We have seen guys scales cars in the dirt at the track, on race day.  The shop floor is the best place to do this, and most floors are not all that level either. 

   
The car should be placed in gear so it will not roll.  In addition, we put some pieces of steel against the tires, to keep the race car firmly in place.  Tire pressures should be set as they are for race day.  Hoosier recomends 23 to 26 lbs. cold for our compound, so we have been using 24 pounds as our starting point.  After that, we add bags of salt to the drivers seat.  The salt bags are each weighed, to insure that we get the same weight as the driver will bring to the seat.  This makes it easier for your "hot shoe" to participate in the scaling process as well.  Before adding the salt, we set the corner heights to the rules, to get close to our starting point, the work to be done.
 
 
Our experience from the circle track days has been that adding a driver to the vehicle takes wedge (LR/RF) percentages from the static settings.  With the road race car, we prefer to have the LF/RF weights a close to equal as we can get.  If you are scaling a roundy roundy racer, make sure the sway bar is not preloaded, which will throw off your readings.  The bar should be fully backed off for scaling.  Due to our heavy driver, all the balast has been removed from our Howe Port City vehicle (former ASA racer).  You may need to add some, to bring the car up to minimum which in our case is 2830 lbs, for GT-2.
You will need to make corner corrections, to get the car where you want it.  With coil over shocks, this is really easy.  Make adjustments at all four corners.  For example if you need a little more LR/RF, then put a turn in the LR/RF, and take a turn out of the RR/LF.  We run Pro Shocks, with double adjustables on the front, and rebound adjustables on the rear.  Find someone to dyno your shocks, and make sure that there is no abnormalities in the curve, which can be seen in a computer print out from the dyno run.
Our car has gotten a little loose a couple time, in tight right hand turn situtations.  We went a little softer on the front springs, that what was in the car when we received it.  This is really the fun part of the whole thing, making small adjustments, and seeing how they affect the feel of the vehicle.
 
 

http://www.gearheadzproducts.com




 

Thursday, November 27, 2014

A Look Under The Hood Of Our GT2 SCCA Road Race Camaro

This car is a GT-2 legal SCCA race car, that can also be entered  as a TA-2 car, in the professional Trans Am series.  Our Howe/Port City car is an ex-ASA perimeter chassis, circle track race car.  It has  an actual series LS1 motor, that runs factory ignition coils, 10.5 compression ratio, dry sump oil pan, 180 headers, and a GM factory ECU. The sealed engines that were supplied for the ASA series went from Chevrolet, to Lingenfelter Performance Engineering (LPE), in Decatur, IN.  You will not find that they have much interest in them now days, but we have received good support from Schwanke Engines, in Springfield, MN.  They are doing a number of motors for the professional Trans Am Series (both LS-1, and LS-3), and offer packages that include everything from short blocks, up to complete, ready to race motors.  Visit them at:
 
 
Our own shop offers a lot of automotive related accessories, as well.  We are stocking more race related items every day, and have just finished redoing a nearby industrial building, for our mail order business.  We have a lot of used parts that are very useable, as well  If you are new to track days, or SCCA racing, we will be glad to answer any questions, and assist you however we can.  Our toll free number is:  866-229-7939.  You can visit us on the web at:
 
 
 

 

Sunday, September 14, 2014

Easy To Install Race Car Switch Panel

This is a good time of year to review everything in the cockpit,  add some upgrades such as an LED oil pressure light, radios, dash labels, etc.  A clean toggle switch arrangement is very important for the driver to have easy access to.  The photos below show our GT-2 house car dash board, as orginally supplied by the fabricators at Port City Racing, in Muskegon, MI.  All the operating switches are to the drivers left, easy to reach, and read as well.  You can purchase toggle switch extensions, which make it much easier  to access the switches, when buckeled snugly into the car.  The panel shown in the second photo is an easy to wire up and install unit, with most  of the hook  ups already made for you.  We had to relocate the fire bottle in the car when we brought it home, so it was in easy reach of the drivers left hand.  A very important detail, the last owner overlooked.  Don't forget to add high density padding, to all areas around the driver, and anywhere near by. 


Thursday, August 7, 2014

GT-2 Howe Port City Road Race Camaro


This blog is all about the work and set up involved with running a Howe type chassis, in road race compeition.  Our base car for discussion purposes can run in the GTA, and GT-2 classes of SCCA.  It would most likely make the grade for TA-2, in the Trans Am series as well.  It is a former ASA race car, with the LS-1 motor which came from Lingenfeher, down in Indiana.  The car was built at Port City Racing, using the Howe ASA spec center section.  It has a Jerrico four speed transmission, Winters quick change reat end, Wilwood brakes, Sweet power steering, Cool Shirt system, and Pro Shocks.  We worked with Schwanke up in Minnesota to get the ECU reflased.  Mike Cope down in Florida did the AR Camaro body conversion, which involved lowering the roll cage to get it to fit.  Mike has also helped us with the basic set up on the car, since this is our first tube frame road racer.  We will make reference to some of the products used on the car, that come from our own business, Gear Headz Products  

http://gearheadzproducts.com/